Leica Tcr805 Total Station User Manual

Up to 3,000 meters using a single standard round prism.

Ensure the tripod head is as visually level as possible before mounting the instrument.

: PinPoint R100 laser (up to 100 meters without a prism) leica tcr805 total station user manual

Open or your preferred data transfer utility on the computer.

Simplifies setting out by defining a line and calculating the offset of points relative to that line. Up to 3,000 meters using a single standard round prism

: While Leica Geo Office may not install, the Data Exchange Manager can still work:

: Contains calibration routines, system settings, and data transmission parameters. Step-by-Step Field Procedures 1. Job Creation Simplifies setting out by defining a line and

Poor target alignment, heavy dust/fog, or measuring to a highly reflective surface in reflectorless mode.

Look through the optical plummet (or activate the laser plummet if equipped) and shift the tripod legs until the crosshairs align with the ground mark.

Check Device Manager on your PC for the correct COM port; match the baud rate on both the PC and TCR805. Loose tripod screws or soft ground.

A customizable key that can be programmed for your most-used function.