Konica Minolta Bizhub C258 Factory Reset

On the physical keypad (or digital keypad if physical keys are absent), type the following sequence exactly: Clear -> Stop -> 0 -> 0 -> Clear -> Stop -> 0 -> 1

You must have the Administrator password (default is often 1234567812345678 or 00000000, depending on configuration).

Once the machine reboots, it will be in its default state. To make it functional again, complete these steps: konica minolta bizhub c258 factory reset

Use this if you only need to clear IP addresses, DNS settings, or scan-to-email configurations. Press > Administrator Settings .

If you need a complete, deep-level factory reset, you must use the service mode. Press . Tap [Display Keypad] (if not already visible). Press [Stop] →right arrow [0] →right arrow [0] →right arrow [Stop] →right arrow [0] →right arrow [1] . On the physical keypad (or digital keypad if

Save your internal scan-to-email and scan-to-SMB destinations via the Pagescope Web Connection interface.

If prompted for a password, the default for Service Mode is often 2. Initialize the Machine Press > Administrator Settings

Before initiating a factory reset, taking the following precautions is critical to avoid data loss or bricking the device:

A factory reset on a Konica Minolta bizhub C258 can range from clearing basic network settings to a full system initialization (wiping all data). Method 1: Partial Reset (Network or Controller)