Nalco 2584 Sds -
The product causes severe burns. Immediately remove contaminated clothing and shoes. Rinse affected skin areas with copious amounts of water for at least 15 minutes. Continue washing during transport to medical facilities. Discard contaminated leather goods (shoes, belts). Wash contaminated clothing before reuse.
When handling NALCO 2584, personnel must wear appropriate PPE, including: Chemical-resistant gloves (e.g., Nitrile, Neoprene). Safety goggles or a full face shield. Protective clothing (aprons, boots). Hygiene Measures Handle in accordance with good industrial hygiene. Wash hands and exposed skin thoroughly after handling. nalco 2584 sds
| Property | Specification | |----------|---------------| | Appearance | Clear, colorless liquid | | pH | Highly alkaline (>0 for concentrated product) | | Solubility | Fully soluble in water | | Stability | Stable under normal storage conditions | | Shelf Life | 1 year from date of manufacture | The product causes severe burns
Based on regulatory listings, Nalco 2584 is classified with the R-phrase (Causes severe burns), indicating it is corrosive. Under the CLP Regulation, products containing sodium hydroxide or potassium hydroxide at concentrations ≥5% are classified as Skin Corrosive Category 1A, with the hazard statement H314: "Causes severe skin burns and eye damage." Continue washing during transport to medical facilities
When handling this chemical, standard industrial safety protocols are required: : Wear chemical splash goggles or a full face shield.
| Mistake | Consequence | Better Approach | | :--- | :--- | :--- | | Using generic PPE recommendations (e.g., latex gloves) | Chemical permeation leading to skin burns | Consult Section 8 for glove material (nitrile/butyl). | | Storing near oxidizers (bleach or chlorine) | Exothermic reaction, fire or toxic gas release | Segregate storage per Section 10 (Incompatibilities). | | Failing to conduct a hazard assessment for eye wash stations | Regulatory citation (OSHA 1910.151) | Install eyewash within 10 seconds of handling area. | | Assuming product is non-hazardous for disposal | RCRA violations and fines | Test pH and phosphonate concentration before disposal. | | Using an expired or obsolete SDS (e.g., pre-GHS) | Invalid for HAZCOM inspections | Set a calendar alert to review/refresh SDS every 12 months. |
A NIOSH-approved respirator if ventilation is inadequate or misting occurs. 9. Physical and Chemical Properties