Disco 240 Dmx Controller - Manual

. This prevents the controller from being damaged by power surges. Use high-quality DMX cables.

(Continue adding 16 for each subsequent scanner up to Scanner 12 at Address 177) 1. Programming Scenes

A "Scene" is a single lighting look, and a "Chase" is a sequence of scenes. #How to Manual Programming Shrppy Light On DMX 240 disco 240 dmx controller manual

: Used to navigate through the 60 available banks of scenes.

Understanding the physical layout of the Disco 240 is essential for efficient programming and live operation. The console surface is split into distinct functional zones. Front Panel Anatomy (Continue adding 16 for each subsequent scanner up

A: You can trigger chases 1-6 and blackout using MIDI Note On messages (typically notes 0-7). The MIDI jack is 5-pin DIN. This is rarely used by modern DJs.

Connect a 3-pin DMX cable from the port on the back of the Disco 240 to the DMX IN port of the first fixture. Understanding the physical layout of the Disco 240

: Select your active Chase choices. The controller bypasses the internal speed faders and triggers the next step in your sequence based on the bass frequencies picked up by the internal microphone. Troubleshooting Guide Probable Cause Corrective Action Lights do not respond to faders. Wrong DMX start address or incorrect fixture profile page.

When you open your Disco 240, the manual states the box should include: