Xpenology Dsm 7 Hyperv [TOP]

Select if using a modern loader, or upload the matching official .pat file downloaded from the Synology Download Center.

For a clean Hyper‑V setup, Arc Loader or RR are usually the recommended starting points because of their user‑friendly interfaces and better support for virtualised hardware.

Select . Note: While DSM 7 supports UEFI, Generation 1 legacy IDE boot interfaces offer broader stability across various Xpenology loader forks. xpenology dsm 7 hyperv

The loader will boot into a miniature Linux configuration environment and display an IP address on the screen.

Under settings, make sure the primary Hard Drive (SATA Location 0 containing the bootloader) is placed at the top of the boot priority list. Step 4: Build the Bootloader in the Virtual Machine Select if using a modern loader, or upload

Synology DSM relies heavily on its MAC address for activation and networking. In Hyper-V, it is recommended to set the MAC address to in the VM settings, rather than Dynamic, to avoid losing network connectivity after reboots. 2. Disk Performance

: Open Windows Disk Management, right-click the target physical drive, and select Offline . Inside Hyper-V VM settings, add a hard drive to the SCSI controller and select Physical hard disk . This delivers maximum read/write performance. Final Hardware Adjustments Note: While DSM 7 supports UEFI, Generation 1

Under , increase the virtual processor count to at least 2 or 4 cores.