Digi Sm-500 — Scale User Manual ((new))
Remove all protective packing foam, plastic film on the display, and any shipping locks (some models have a red plastic tab under the pan – pull it out).
3kg/6kg (dual interval), 6kg/15kg (dual interval), or 15kg/30kg.
If you’ve just picked up a digital scale, you’re holding a reliable tool for precise weighing. While the full manual covers every technical detail, here’s a practical breakdown to get you weighing accurately right away.
Thread the paper backing beneath the thermal printhead block and around the guide rollers. digi sm-500 scale user manual
Proper physical placement and calibration prevent inaccurate readings and hardware degradation. Physical Placement
If you need diagrams, detailed calibration steps, or safety certifications:
If you experience hardware failure (cracked LCD, no response after battery change, persistent “ERR” codes), contact Digi authorized service centers. Have the following ready: Remove all protective packing foam, plastic film on
If you know the exact weight of the container (e.g., 15 grams), type 15 (depending on decimal configurations) and press the [TARE] key before placing anything on the scale.
Typically configured for dual-range capacities (e.g., 6 kg/15 kg or 15 lb/30 lb) to maintain accuracy at lower weights. 2. Unboxing and Initial Hardware Setup
Input the using the numeric keypad and press Print/Enter . While the full manual covers every technical detail,
Detailed service manuals for the SM-500 MK4, outlining technical specs, can be found online.
Locate the calibration switch (Span Switch) underneath the scale housing. Toggle it to the "ON" or "CAL" position.
Remove all protective packing foam, plastic film on the display, and any shipping locks (some models have a red plastic tab under the pan – pull it out).
3kg/6kg (dual interval), 6kg/15kg (dual interval), or 15kg/30kg.
If you’ve just picked up a digital scale, you’re holding a reliable tool for precise weighing. While the full manual covers every technical detail, here’s a practical breakdown to get you weighing accurately right away.
Thread the paper backing beneath the thermal printhead block and around the guide rollers.
Proper physical placement and calibration prevent inaccurate readings and hardware degradation. Physical Placement
If you need diagrams, detailed calibration steps, or safety certifications:
If you experience hardware failure (cracked LCD, no response after battery change, persistent “ERR” codes), contact Digi authorized service centers. Have the following ready:
If you know the exact weight of the container (e.g., 15 grams), type 15 (depending on decimal configurations) and press the [TARE] key before placing anything on the scale.
Typically configured for dual-range capacities (e.g., 6 kg/15 kg or 15 lb/30 lb) to maintain accuracy at lower weights. 2. Unboxing and Initial Hardware Setup
Input the using the numeric keypad and press Print/Enter .
Detailed service manuals for the SM-500 MK4, outlining technical specs, can be found online.
Locate the calibration switch (Span Switch) underneath the scale housing. Toggle it to the "ON" or "CAL" position.