Once prepared, with the metal contacts facing down and the beveled corner oriented correctly according to the markings near the SIM slot.
Proper installation is critical for accurate tracking data and preventing vehicle battery drain. SIM Card Requirements
The GT005 supports live tracking through an online platform, such as or a similar generic platform (often listed as Sinotrack or similar compatible systems).
Where 138XXXXXXXX is the phone number of the SIM card inside the tracker. Gt005 Gps Tracker User Manual
| LED | Status | Meaning | |-----|--------|---------| | Green | Fast blink | Searching GPS | | Green | Slow blink (1s on/3s off) | GPS fixed | | Green | Off | GPS disabled / no signal | | Blue | Fast blink | Searching GSM | | Blue | Slow blink | GSM OK, no GPRS | | Blue | Solid | GPRS connected | | Red | Solid | Charging / External power | | Red | Blinking | Low battery |
Connect to the positive terminal of the vehicle battery (9V-50V).
The GT005 requires a working GSM SIM card with the following specifications: Once prepared, with the metal contacts facing down
A crucial step is removing the SIM card's PIN code request before insertion. This must be done using a mobile phone to ensure the tracker can connect to the cellular network without interruption. You should also disable any balance inquiry SMS services from your mobile provider, as these can interfere with the device's operation.
The GT005 is configured remotely by sending formatted text messages (SMS) from your smartphone to the phone number assigned to the tracker's SIM card. Center Number (Admin) Binding
For direct control without the app, users can send SMS commands to the device's SIM card number: Where 138XXXXXXXX is the phone number of the
: Insert a standard GSM micro-SIM card. The card must have active SMS , voice , and GPRS data services enabled.
Disable the SIM card PIN code lock using a mobile phone before inserting it into the tracker. Step-by-Step Installation
Ensure the device is not covered by metal. Test the device outdoors for the first fix.
Connect to the vehicle chassis ground or the negative battery terminal.