How+on+rns+300+change+language+new [new] [DIRECT]

Note: This guide does NOT work for RNS 310, RNS 315, or RNS 510 (those have touchscreens).

Scroll through the list to find (or your preferred language). Press the right knob to confirm your selection.

End of report

Insert a valid Volkswagen navigation CD, wait for it to load, and then try changing the language in the menu again. 3. Disconnect the Battery how+on+rns+300+change+language+new

Disconnect the car battery for 2 minutes. Reconnect. The RNS 300 should default to "English" if it was originally set to English before the power loss. If not, use the physical button rotation method listed in Step 6 above—do not rely on the text.

: Press the physical SETUP button located on the faceplate of the radio.

: Click Test , verify the dashboard adjustments, and click Save . Cycle the ignition key off and back on to finalize the synchronization. Note: This guide does NOT work for RNS

Use the (the "OK" knob) to scroll through the menu options.

Method 2: Handling Foreign Language Menus (Translation Guide)

is a legacy "entry-level" monochrome navigation unit found in mid-2000s Volkswagen, SEAT, and Skoda vehicles. End of report Insert a valid Volkswagen navigation

The most common method to change the language on an RNS 300 is by using the correct navigation CD. The procedure is generally as follows:

: Turn on the ignition and press the power button on the unit.

: On the monochrome display, turn the right-hand rotary/menu dial to scroll down the menu list. Highlight "System" (or "Einstellungen" if it is in German) and press the center of the dial to confirm selection.