Autocom 2020.23 Windows 11
Click and confirm the installation if Windows prompts you with a security warning. Step 6: Configuring the COM Port and Firmware Update Launch AutoCom 2020.23. Go to the top menu and select Settings > Hardware setup . Select Cars or Trucks depending on your target vehicle.
Change the USB port you are using. Always plug the VCI into the same physical USB port on your laptop to keep the COM port assignment consistent.
: Enables users to read and erase fault codes (DTCs), perform service resets, and execute component activations (e.g., testing a fuel pump).
Ensure the VCI is connected during this step if prompted, or install the driver separately to prevent "Virtual COM Port" issues.
AutoCOM 2020.23 was released before Windows 11’s strict driver signing (VBS/HVCI) and security architecture. On Windows 11, you will typically face: autocom 2020.23 windows 11
The software relies on older framework architectures. Open the Windows Start Menu, search for "Turn Windows features on or off," and ensure both .NET Framework 3.5 and .NET 4.8 are checked and installed.
: Launch the setup file. If prompted for a password during extraction or setup, try "ThankYou".
At least one functional USB 2.0 or 3.0 port for the VCI (Vehicle Communication Interface) multiplexer.
Autocom 2020.23 remains one of the most popular diagnostic software versions for multi-brand cars and trucks. While it was originally developed during the Windows 10 era, many mechanics and DIY enthusiasts now need to run it on Windows 11. Click and confirm the installation if Windows prompts
Windows 11 high-DPI scaling issues on modern high-resolution displays.
: Windows 11 (64-bit version recommended; some versions may not support Home edition). : Intel® Core i5 or better. (though 8 GB is recommended for smoother multitasking). : At least 16 GB of free hard drive space
The automotive diagnostic landscape is constantly evolving, with software keeping pace with the increasing complexity of vehicle electronics. For many mechanics, independent workshops, and DIY enthusiasts, the release (often utilized alongside Delphi software) remains a cornerstone tool for diagnosing passenger cars and light commercial vehicles.
This file must be sent to your supplier or run through a separate activator tool to generate a response file for final activation. Option 2: Virtual Machine (Recommended for Stability) Select Cars or Trucks depending on your target vehicle
Enhanced database covering a wide range of manufacturers, including newer models up to early 2020/2021, and robust support for older vehicles.
Right-click the Autocom desktop shortcut, select Properties , and navigate to the Compatibility tab. Check the box for "Run this program in compatibility mode for:" and choose Windows 7 or Windows 8 .
Navigate to the Drivers folder inside your Autocom installation directory. Click to install the USB serial port drivers. Firmware Update
Tests indicate that Autocom 2020.23 functions correctly on Windows 11, including successful ECU connections and activations.