Patton Heater Model Poh2501 Manual ^hot^ | High Speed

Turn the Thermostat Dial fully clockwise to the maximum setting.

Ensure the unit is on a flat surface. Most Patton models have a tip-over switch that cuts power if the unit is tilted.

Place the heater on a firm, level surface away from flammable materials.

Store the heater in its original packaging or a sealed box to protect it from dust. Store the unit in a cool, dry place. patton heater model poh2501 manual

– If the unit overheated, the overheat protection may have engaged, and you may need to manually press the reset button (see above).

Allow the heater to run in a well-ventilated area for 15 minutes; the smell should dissipate. Combustion of nearby items.

Turn the Power Selector to to heat the room quickly. Turn the Thermostat Dial fully clockwise to the

All space heaters, including the Patton POH2501, should be used with great care. The CPSC (Consumer Product Safety Commission) occasionally issues recalls for various space heaters due to potential fire or electrical hazards. It is highly recommended to search the CPSC website for "Patton" or "oil-filled heater" to see if your unit is affected by any recall.

Electric utility heaters draw a significant amount of power and generate high localized heat. Read and follow these safety guidelines to prevent fire, electrical shock, or injury.

Slowly turn the thermostat knob counterclockwise until you hear a distinct click and the heating elements turn off. Place the heater on a firm, level surface

Use a vacuum cleaner with a brush attachment or a can of compressed air to clear dust, lint, and debris from the front intake grille and rear exhaust vents.

: Operates at 1500 Watts for maximum heat output in larger or uninsulated rooms.

– A pendulum‑type safety switch shuts off the heater if it is tipped over, preventing a potential fire hazard.

Never leave the heater running unattended or while you are sleeping. Always unplug the unit when it is not in use. 5. Built-In Safety Features

Wipe the heavy-duty metal housing with a soft, slightly damp cloth. Do not use abrasive cleaners or chemical solvents.