Ikegami | Bsf-300 Manual

To access the internal setup parameters, you must use an external Remote Control Panel (like the Ikegami OCP-200 or OCP-300) connected via the COMMAND port, or use the front-panel rotary encoder if available. Critical Menu Adjustments Genlock Phase Alignment Path: MENU > SYSTEM > GENLOCK

Supports cable runs up to 350 meters (approx. 1,150 feet) while supplying power to the camera head, or longer using local power. Technical Specifications Matrix Specification Power Requirement AC 100V to 240V $\pm$10%, 50/60Hz Power Consumption Approx. 45VA (Base unit without camera load) Operating Temperature -10°C to +45°C (14°F to 113°F) Weight Approx. 7.0 kg (15.4 lbs) Dimensions (W x H x D) 215mm x 66mm x 415mm (excluding protrusions) 2. Front and Rear Panel Interfaces

: Using Single Mode fiber for long-distance remote productions.

BNC connectors for studio sync loop-through and teleprompter video distribution. ikegami bsf-300 manual

If you are performing maintenance on the BFS-300, you may encounter these trim-potentiometers (pots):

Always use the included dust caps when cables are disconnected. Even a microscopic speck of dust can cause a total loss of video signal. Resources for the Official Manual

Serial or network connections (Ethernet/CP cable) to interface with Ikegami OCP-200 or OCP-300 control panels. 3. Installation and Setup Procedure To access the internal setup parameters, you must

: Can be integrated with Ikegami USA controllers like the OCP-300 or MCP-300 using the BSH-300 command converter for Ethernet-based control. Operational Guidelines BSF-300/L - Ikegami USA

Command Network ports for connecting Operational Control Panels (OCP-200 / OCP-300).

Turn on the BSF-300 base station. The unit will supply power down the hybrid cable to the camera head. Check the front panel LEDs to confirm a stable fiber link. 4. Menu Navigation and Calibration Front and Rear Panel Interfaces : Using Single

The manual for your specific variant is essential for proper cable handling and connection.

Ikegami BSF-300 (and its SMPTE-connector variant, the ) is a compact, affordable 1.5RU digital base station designed for uncompressed high-quality fiber transmission. It is primarily paired with the Fiber Adaptor for use with camera systems like the

Navigating the internal menu allows engineers to calibrate video phases, map audio channels, and assign tally routes. Accessing the Engineering Menu