Owon Hds2102s - Firmware Update Verified

Before updating, check your current firmware to ensure you actually need the update. Turn on the . Press the [SYSTEM] button. Select [SYSTEM] (F2) on the screen.

Connect the scope to your PC via the USB cable. Set USB Mode:

: Connect and Configure the HDS2102S

: Restart and Verify

: Feeding a reference 50 MHz signal (which exhibits a true 20-nanosecond period) into the device at 5ns/div read perfectly, but switching down to 2ns/div compressed the visual waveform to read as a 16-nanosecond period. owon hds2102s firmware update verified

Owon HDS2102S Firmware Update Verified: The Ultimate Step-by-Step Guide

: Associated with earlier mainboards built around standard flash configurations. Early Gigadevice chips featured hard-coded, read-only OTP SecureRom layers making certain base runs non-upgradable. Before updating, check your current firmware to ensure

Write down the exact and Current Firmware Version . 2. Gather Your Tools A Windows-based PC (Windows 10 or 11 preferred).

Your PC needs to recognize the oscilloscope in its bootloader/update mode. Turn off your Owon HDS2102S. Connect the USB-C cable to the oscilloscope and your PC. Select [SYSTEM] (F2) on the screen

Once the device shuts down, your firmware update is complete. Here is how to verify it was successful.