Yokogawa Gyro Compass Cmz 700 User Manual !!top!! -
A compact version where the master compass drives repeaters directly without a separate control box. CMZ700S (Single):
The system will run a self-diagnostic check. The display will show the current un-settled heading.
Before diving into operations, a review of the baseline engineering specifications from the user manual highlights why this system is highly regarded:
While detailed physical installation must be performed by certified marine electronics technicians, the manual specifies crucial environmental parameters: yokogawa gyro compass cmz 700 user manual
Turn the main distribution panel breaker for the gyro compass system. Flip the power switch on the CMZ-700 Control Unit to ON .
Whether you are a marine engineer, navigating officer, or technician, understanding the operational manual of the CMZ-700 series (including the CMZ-700S, CMZ-700D, and CMZ-700B) is essential for ensuring vessel safety and regulatory compliance. 1. System Overview and Core Components
Replace rubber seals and O-rings to maintain a hermetic seal. A compact version where the master compass drives
For the modern user, the original manual is insufficient.
The Yokogawa Gyro Compass CMZ 700 is a masterpiece of electromechanical design. It will provide decades of true north heading data—provided it is treated with respect. The is not a dusty binder to be ignored; it is the operational key to the device. From the correct startup sequence to advanced latitude error calibration, every answer lies within those pages.
The CMZ-700 series features a unique fluid-suspended gyrosphere, which eliminates the need for complex torsion wires. This design minimizes mechanical wear, enhances shock resistance, and ensures stable heading outputs even under harsh sea conditions. Key Technical Specifications Within 4 hours (Static) Slew Rate: Follow-up speed up to 30° per second Before diving into operations, a review of the
The CMZ-700 provides a range of functions and features to support navigation:
The lubber line on the master compass must be aligned parallel to the ship's fore-and-aft centerline within an accuracy of ±0.5∘plus or minus 0.5 raised to the composed with power 3. Operating Instructions Pre-Start Checklist Before starting the system, operators must verify that:
Occurs in dual systems (CMZ-700D) when the difference between Master Compass 1 and Master Compass 2 exceeds a user-defined threshold (typically set between 2.0∘2.0 raised to the composed with power 5.0∘5.0 raised to the composed with power Standard Troubleshooting Steps
Keep the vessel stationary during this period whenever possible to ensure optimal alignment. 🧭 Operation and Display Panel Navigation
IEC 61162-1 (NMEA 0183) digital serial data, 24V step signal, and analog outputs.