V2000-c Rfid Access Control User Manual |work| Jun 2026

Regular maintenance and upgrades are essential to ensure the V2000-C RFID access control system operates efficiently and securely. The following recommendations are provided:

If you need help tailoring this to a specific layout, let me know:

| Mode | Code | Behavior | Best Use | | :--- | :--- | :--- | :--- | | | 19 0 # | Swipe or PIN keypad. Relay activates. | Standard office, no high security. | | Card + PIN | 19 1 # | User must swipe AND enter PIN. | High-security server rooms, labs. | | Card or PIN | 19 2 # | Either a valid card OR a valid PIN works. | Convenience stores, gyms. |

Whether you lost the physical booklet that came in the box or you are trying to program a newly installed unit, this comprehensive user manual covers everything you need to know. 1. Product Overview and Specifications

A: Connect the REX relay’s NO output to terminal 6 (PUSH) and COM to terminal 2 (GND). V2000-c Rfid Access Control User Manual

Swipe the RFID card or fob close to the keypad reader. (The machine will beep once). Press # to confirm, then press * to exit. Adding Users (PIN Only) Enter programming mode. Press 1 . Enter a unique (e.g., 0005 ) followed by # . Enter a 4-digit to 6-digit PIN . Press # . Press * to exit.

While in programming mode, press then "0" then "1" .

| Mode | Command | Description | | :--- | :--- | :--- | | Card Only | *Master# → 3 → 1# | Requires valid card only | | Card + PIN | *Master# → 3 → 2# | Requires card and matching PIN | | PIN Only | *Master# → 3 → 3# | Enter PIN on keypad |

Warning: This wipes all memory clean. This cannot be undone. Enter programming mode. Press 2 . Enter 0000 . Press # . 6. Advanced Security and Relay Configurations Adjusting the Door Open Delay Time Regular maintenance and upgrades are essential to ensure

Connect the wire of the V2000-C to the Power Supply +12V.

Never leave the default system password active. To change it: Enter Programming Mode. Press 0 . Enter your , then press # .

Press 5 , flash the new EM RFID Card past the sensor reader lens, and press # . Enroll Card by Index Number: Press 5 →right arrow Enter a 3-digit slot index (e.g., 001 to 999 ) →right arrow Swipe the card →right arrow Press # . Enroll a 6-Digit Common Pin: Press 6 →right arrow Enter New 6-Digit PIN Code →right arrow Press # →right arrow Re-enter PIN Code →right arrow Press # . Deleting User Access V2000-c Access Control Manual - Facebook

You can configure how users authenticate themselves to gain entry. In programming mode, press 3 + 0 + # . | Standard office, no high security

Connect the wire to the +12V output of your access control power supply.

Operation error, invalid PIN/Card, or programming command rejected. 4. Master Programming Guide

To enter programming mode, you must use the . The factory default Master Code is 999999 .