Xplus Firmware Install - Qidi

You will hear a series of beeps, or see a progress bar on the screen.

After installing the new firmware:

This is a comprehensive guide to understanding, downloading, and installing firmware for the (covering both the original X-Plus and the X-Plus 2). qidi xplus firmware install

: Plug the drive into the printer and tap the About icon. You should see "Updating in Progress" in the lower left corner.

Turn on your QIDI X-Plus. Navigate to the screen (usually the gear icon) > About Machine . Here you will see your current version (e.g., V1.2.3). Write this down. If you are already on V2.1.2, you likely do not need an update. You will hear a series of beeps, or

This comprehensive guide covers the step-by-step installation process, safety precautions, and troubleshooting steps for a successful firmware flash. Pre-Update Checklist

: A new feature in the 'Tool' menu allows the use of the heated bed and chamber for drying specific filaments like ABS and Polycarbonate. Installation Methods You should see "Updating in Progress" in the

Depending on your current firmware version, you can install updates in two ways:

The QIDI X-Plus 3 runs on an open-source Klipper environment managed via a Linux-based host board. Updates typically involve two components: the host system software (updated via Fluidd/MainSail or USB) and the mainboard/EMC firmware. Step 1: Download the Official Firmware Navigate to the official QIDI Tech software download page. Select the model.

To install the Qidi X-Plus firmware, follow these steps:

Qidi has different mainboards (V1 vs V2). Flashing the wrong firmware will cause a black screen.