Safe for use with Stainless Steel 304 , Neoprene, Buna-N, and rigid plastics like Polyethylene (HDPE) and Polypropylene.

DANGER

After installation, allow the system to circulate for at least 24 hours to ensure the chemical is evenly distributed. Storage and Disposal

Keeps suspended solids moving through the system rather than settling in low-flow areas. 2. MSDS / SDS Essential Highlights

Designated, labeled container for the product.

Pump calibrated and checked for leaks prior to system live-run

Always ensure an emergency eyewash station and safety shower are functional and located within 10 seconds of the installation site.

Flush immediately with gently flowing water for at least 15 minutes. Seek immediate medical attention.

Once the physical piping and metering pumps are installed, prime the system with water first to check for leaks. After verifying system integrity, switch to Nalco 3272. Calibrate the stroke length and frequency of the metering pump to match the dosage rates calculated by your water treatment specialist.

is a specialized water treatment chemical composed primarily of Sodium Carbonate and Sodium Sulfite , commonly used as an oxygen scavenger and pH adjuster in industrial boiler systems. To ensure safe operations, facility managers must follow the strict handling guidelines outlined in the product's Safety Data Sheet (SDS/MSDS). Official documents must be obtained directly through the official Ecolab Nalco Water SDS Request Form .