Gateman V20 Manual [work] < DELUXE | BUNDLE >
Understanding your hardware ensures proper installation and optimal performance. Rim lock (secondary lock) Authentication: PIN code and RFID card/key tag PIN Code Length: 4 to 12 digits Card Capacity: Up to 20 registered cards Power Supply: 4 AA alkaline batteries (6V) Emergency Power: 9V rectangular battery Material: Fiberglass and die-cast aluminum Installation Overview
Located at the bottom; uses a 9V battery if internal batteries die.
Replace all 4 AA batteries simultaneously with fresh, high-quality alkaline batteries. Do not mix old and new batteries.
You must touch the keypad or press the button to lock it. gateman v20 manual
Houses the 4 AA batteries, the registration button (marked 'I'), the manual open/close lever, and the electronic open/close button.
Go to the outdoor keypad and enter your desired PIN (4 to 12 digits).
Press the again on the inside unit to end the registration process. Deleting All Registered Cards Press the [I] button on the inside unit. Do not mix old and new batteries
If you have misplaced your physical copy of the , this guide covers the essential operating instructions, from initial setup to troubleshooting, ensuring you get the most out of your device.
Touch the front keypad with your palm or fingers to wake it up. Enter your registered PIN code, then press [*] .
The lock remains unlocked until you press the Open/Close button on the inside or touch the outdoor keypad with your palm. Go to the outdoor keypad and enter your
Touch the RFID card or key tag to the "Card" reader icon on the outdoor unit. You can register multiple keys consecutively. Press the button to save. Unlocking from Outside :
To program your lock, locate the inside the battery compartment on the interior unit. Keep the door open during programming to prevent accidental lockouts. 1. Changing the Master PIN Code
If the internal batteries die completely before you can replace them, the keypad will not light up. You can power the lock externally: Purchase a standard .
