Claw Machine Manual ((hot)) | Toy Taxi

Note: If the machine exhibits unusual behavior, perform a full self-test by pressing the "TEST SW" on the mainboard during startup.

Check the dedicated solenoid fuse on the board. Test coil continuity with a multimeter. Hold voltage set too low

Ultimately, the knowledge needed to repair and operate a Toy Taxi is still widely available—you just have to be willing to look beyond the original paper documents. toy taxi claw machine manual

The Toy Taxi claw machine, manufactured by Coast to Coast Entertainment, is one of the most recognizable and profitable arcade games in the industry. Whether you are an arcade operator looking to maximize revenue or a private collector wanting to configure your machine for home use, understanding the mainboard settings and mechanical components is essential.

Adjusts attract mode music frequency (Always on, every 5 mins, or off). Claw Strength (Catch) Note: If the machine exhibits unusual behavior, perform

: Verify the machine's voltage (110V or 220V) before plugging it into a standard outlet.

Wipe down the infrared sensor eyes located inside the prize chute. Dust buildup here will trick the machine into thinking a prize was dropped, locking out gameplay. 6. Comprehensive Troubleshooting Matrix Likely Cause Corrective Action Machine won't turn on Blown fuse or dead outlet Hold voltage set too low Ultimately, the knowledge

| Subject # | Setting Name | Description | | :--- | :--- | :--- | | 0 | Game Time | Sets the timer for each play (1-99 seconds). | | 1 | Strong Claw Power | Voltage for the "strong" grab (e.g., 13-48V). On 24V motor machines, this is halved (6.5-24V). | | 2 | Weak Claw Power | Voltage for the "weak" grab (e.g., 2-47V). On 24V motor machines, this is halved (1-23.5V). | | 3 | Strong Claw Power Timing | Milliseconds (0-99ms) the claw holds strong voltage. | | 4 | Winning Rate | Frequency of a strong grab (e.g., 1 in 250). | | 5 | Play-Until-You-Win Value | The maximum number of plays (1-190) before a win is forced. | | 6 | Claw String Setting | Drops claw to floor to set length. Power off to save. | | 7 | Auto Game Start Position | Used with Auto-Start mode. | | 8 | Floor Height | Manually adjusts the string length with the joystick. |

Standard Toy Taxi units operate on 110V AC (or 220V AC depending on the regional transformer configuration).