Check and select Windows XP (Service Pack 3) or Windows 7 . Check Run this program as an administrator and click Apply . Step 3: Connect Hardware
Assigns static IP addresses or configures devices to request IPs via DHCP.
. It allows administrators to discover print servers on a network, assign IP addresses, and configure printer port settings. Key Functions of PS Admin Device Discovery
FLUSHING BUFFER... CLEARING QUEUE... RESTARTING PORT SERVICES... dlink ps admin
Though largely historical, PS Admin retains robust support for environments. It allows the print server to function as a NetWare remote printer or print queue object. Using the Remote Printer tab in the NetWare protocol settings, admins can bind printer ports to NetWare print servers and queues directly from the PS Admin interface.
After installation, you can start PS Admin by:
Note: As shown in D-Link DP-301P+ support resources , PS Admin is typically required for older DP series, often supplying version 3.00. 1. Installing and Setting Up PS Admin Check and select Windows XP (Service Pack 3) or Windows 7
PS Admin is not discovering the print server what should I do? | D-Link
: The software often uses the IPX/SPX protocol to discover print servers on the network. If the utility cannot find the device, users may need to manually install the IPX/SPX compatible protocol in their computer's network properties.
Click OK, then select your printer manufacturer and model driver to complete the setup. Troubleshooting Common D-Link PS Admin Issues PS Admin Cannot Find the Print Server CLEARING QUEUE
Elias grimaced. A port error usually meant a logic lock. The print queue had likely corrupted, and the buffer was overflowing with ghosts of failed print jobs. The web interface couldn't fix a corrupted buffer. Only a hard reset or a deep administrative purge could fix it.
The D-Link PS Admin interface is user-friendly and intuitive. Here's an overview of the main sections: