The Oppo F1s A1601 is powered by a MediaTek MT6750 processor. Because it utilizes a MediaTek chipset, flashing the firmware requires specific tools designed to communicate with MediaTek's bootloader interface. Essential Checklist Before Flashing:
The device is powered by the (or MT6750) chipset, which dictates the type of tools needed for flashing. Base OS: Android 5.1 (Lollipop). Upgradable To: Android 6.0 (Marshmallow). Custom Interface: ColorOS 3.0. Storage Variants: 3GB RAM / 32GB ROM or 4GB RAM / 64GB ROM. When to Flash Firmware
Turn off your OPPO F1s completely. Hold down the Volume Up and Volume Down buttons simultaneously, then connect the phone to the computer using the USB cable.
Because the OPPO F1s A1601 runs on a MediaTek MT6750 processor, the is the standard utility used to flash firmware via a computer. This method is ideal for dead or boot-looped devices. Required Tools to Download: firmware oppo f1s a1601
:
Click the green button at the top of the software window. Turn off your Oppo F1s completely.
| | Likely Fix | |---|---| | SP Flash Tool doesn’t detect phone | Reinstall MediaTek VCOM drivers, try a different USB port, or use a USB 2.0 port. Ensure the phone is fully off before connecting. | | “S_BROM_CMD_STARTCMD_FAIL” error | Battery may be too low; charge for 30 minutes and retry. Also try a different USB cable. | | Phone only vibrates and stays black | This is a “dead boot” brick. Use SP Flash Tool with the correct scatter file and flash the full firmware. If it fails, your eMMC chip may be damaged. | | “No service” or unknown baseband after flash | Flash a different firmware version . Some versions cause baseband loss; others restore it. Try A1601EX_11_A.16_160920 as a safe fallback. | | Flashing fails with “auth error” | Your device requires authorized flashing. Use the O+ Service Tool instead of SP Flash Tool. | The Oppo F1s A1601 is powered by a MediaTek MT6750 processor
Before you begin, it's crucial to know your device's hardware specifications, as they determine which firmware is compatible. This knowledge is vital to avoid bricking your phone. The OPPO F1s (A1601) is powered by the MediaTek MT6750 processor, a 64-bit octa-core chip. It runs on initially, with an available upgrade path to Android 6.0 Marshmallow , all layered with OPPO's own ColorOS skin. The device is a dual-SIM smartphone that supports Nano-SIM cards, and its connectivity options include Wi-Fi, GPS, Bluetooth, NFC, USB OTG, FM radio, 3G, and 4G.
Requires a PC, USB cable, and MediaTek USB drivers.
Flashing system software carries inherent risks. To prevent data loss or a hardware malfunction, complete the following preparation checklist: Base OS: Android 5
For newer security protocols, Oppo requires authentication. If SP Flash Tool fails with an authorization error, you may need the O+ Service Tool (see Method 3).
Hold down the button on the phone and connect it to the PC using your USB cable.
: