No. PVR recordings on an external drive remain untouched. However, scheduled timers and channel lists may be erased. Back them up first.

Share your experience (or warn others about a bad firmware build) in the comments below. Your feedback helps the entire community.

Highlight or OK and hit enter on your remote control to initiate. 4. Wait for Completion

If you encounter any issues during the firmware update process, try:

Reformat the USB drive back to FAT32. Ensure the .bin file sits outside of any folders. Corrupt download packet file or loose USB connector lines.

| Problem | Likely Fix | |---------|-------------| | USB not detected | Reformat to FAT32, use smaller USB (≤8GB) | | "Wrong file" error | Firmware mismatch – get correct version for STP A01 Top | | Box stuck on boot | Try forced recovery: hold CH+ while powering on | | Lost remote functions | Perform factory reset via front panel buttons (if available) |

Look at your device's System Information menu (Menu → System Info). The new firmware should be newer than your current version.

: Press Menu on your remote control. Navigate to Settings (or Pengaturan ) > System (or Sistem ) > Upgrade . Select USB Upgrade : Choose USB Upgrade from the options.

This is the most reliable method for the , especially if the "Update via Internet" option is unavailable.

Compare this with the latest firmware version available on the manufacturer’s website or support forum. If your version is older, proceed with the update.

This is the easiest method but requires a stable internet connection. Connect to Wi-Fi Wi-Fi Dongle (specifically the Advance WF-01 is recommended) into the USB port. button on your remote. settings menu. Scan for your network, enter your password, and click Navigate to Upgrade Return to the main menu and select the Meningkatkan Upgrade via Internet Upgrade Jaringan Start Update . The STB will check for the latest version. If a new version is found, a progress bar will appear. Do not turn off the power during this time.