The burner failed to light or register a flame after multiple consecutive sequences.
Turn the domestic water regulating knob to pick a target temperature between 35∘C35 raised to the composed with power C 60∘C60 raised to the composed with power C
by holding the reset button for 1–5 seconds, allowing the boiler to attempt its ignition sequence once more. Epilogue: Long-Term Care Gas boiler Baymak Lambert LX 24 FI P EXP 24 kWt
The front interface features an intuitive layout designed for easy adjustment and system monitoring. Lambert Lx 24 Fi Manual English
Because it is a room-sealed appliance, the flue terminal must not be obstructed under any circumstances.
For the complete technical documentation, it is advised to search for the specific PDF, often found on platforms like Scribd or Baxi support forums.
The heating temperature sensor is damaged or disconnected. Requires replacement by a technician. Domestic Hot Water NTC Sensor Fault The burner failed to light or register a
Never operate the system without water. Ensure the pressure gauge always stays within the recommended limits. Installation and Clearance
If you smell gas, turn off the main gas valve immediately and call a professional. Ensure the flue pipe is not blocked or damaged.
Taps may still deliver water, but temperature control will fail. Replace NTC sensor. Low Water Pressure System water pressure has dropped below 0.5 bar. Because it is a room-sealed appliance, the flue
The Lambert Lx 24 Fi is a wall-hung, conventional (non-condensing) combi boiler, designed to provide both central heating and instantaneous domestic hot water. It is a product of Baymak, which adheres to ISO 9001 and ISO 10002 quality standards.
Connects to hot water taps.
+----------------------------------------------------+ | LCD DISPLAY | | [Radiator Symbol] [Tap Symbol] | +----------------------------------------------------+ ( O ) ( O ) [RESET] Heating Temp Hot Water Temp Reset/Power 1. Powering the System On/Off