John groaned inwardly. He knew that the ICP Con I-7561 was an older device, and its drivers were notoriously difficult to find. But he was the go-to guy for all things technical, so he reluctantly agreed to help.
Note the COM port number assigned next to it (e.g., ). You will need this exact port number to configure your industrial automation or SCADA software.
For the legacy legacy I-7561 module, download via the ICP DAS USA Documentation Portal . Icp Con I-7561 Driver Download
If you are operating an older industrial workstation, you may need legacy software versions:
ICP CON I-7561 Driver Download Link
ICP CON occasionally updates the internal chipsets inside their converters. An older I-7561 might use a different driver architecture than a newer one.
until the driver is installed if you are using an older OS like Windows 7. Run the installer : Download the file, extract it, and run the setup executable. Connect the hardware : Use the included CA-USB18 cable to connect the I-7561 to your PC's USB port. Verify in Device Manager Device Manager Ports (COM & LPT) John groaned inwardly
Complete Guide to ICP CON I-7561 Driver Download and Installation
: For the legacy I-7561 (Prolific), use the pl2303 module. The USB Vendor ID (VID) is 0x1B5C and the Product ID (PID) for the I-7561U is 0x0104 . Note the COM port number assigned next to it (e
