Align the CPU notches with the two alignment keys inside the socket.
User Manual Motherboard : Technical Specs & Guide The (often referred to as the Medion MS-7616
: Intel Lynnfield (Core i5-700, i7-800 series) and Clarkdale (Core i3-500, i5-600 series).
To get the most out of your MS-7616 motherboard, here are some tips and tricks: User Manual Motherboard Ms-7616...
Used to reset BIOS settings to default if the system fails to boot. 5. Drivers and BIOS Updates
Open the load lever, align the notches on your LGA 1156 processor with the socket, and gently lower it. Secure the lever.
Align the triangle on the CPU with the triangle on the socket. Lower the CPU carefully; . Secure the lever. Installing Memory (RAM) Open the plastic retention clips on the DDR3 slots. Align the notch on the memory module with the slot notch. Press firmly until the clips lock into place. Installing a Graphics Card Insert the graphics card into the PCI Express x16 slot. Align the CPU notches with the two alignment
If you can describe any text printed near the CPU socket or RAM slots, I can give more precise guidance.
Detailed hardware specifications and memory configuration tips can be found on the Medion Community Forum. Key Specifications for MS-7616
Realtek RTL8111DL Gigabit Ethernet (10/100/1000 Mbit) 2. Processor (CPU) Compatibility Align the triangle on the CPU with the
: Connect high-speed Serial ATA hard drives or SSDs. Each connector supports one device. Critical Safety Precautions
The MS-7616 features the LGA 1156 socket. It supports 32nm and 45nm Intel processors. It is important to note that because this is an OEM board, to specific models. Supported CPU Series: Intel Core i7 (8xx series, e.g., i7-860, i7-870)