Usb Device Id Vid 14cd Pid 1212- Exclusive ★ Exclusive Deal
Given the VID and PID, here are some possible devices that might use this identifier:
If the device is not working or you need to verify it's the correct hardware, follow these steps:
If your computer fails to recognize this specific device, try these steps: Usb Device Id Vid 14cd Pid 1212-
[CC_Install.Services] AddService= ,2
| Problem | Potential Cause | Troubleshooting Steps | | :--- | :--- | :--- | | | Power management conflict or faulty USB port | 1. Disable USB selective suspend in Power Options. 2. Perform a full shutdown (not a restart). 3. Try a different USB port, preferably USB 2.0. | | "Device Descriptor Request Failed" (Code 43) | Driver corruption or hardware failure | 1. Uninstall the device in Device Manager. 2. Disconnect the device. 3. Reboot and reconnect. | | Drive Letter Not Assigned | Disk Management conflict | 1. Open Disk Management ( diskmgmt.msc ). 2. Locate the removable drive. 3. Right-click and manually assign a drive letter. | Given the VID and PID, here are some
Initially, the device worked fine. Then, after a Windows update or a system restore, it started showing as an "Unknown USB Device (Device Descriptor Request Failed)" or with a yellow triangle. The driver database entry for 14CD:1212 got corrupted.
This 16-bit number points directly to the silicon manufacturer. Here, it identifies Super Top / Moai Electronics . This firm manufactures the underlying flash storage microcontroller or bridge chip that translates raw SD card signals into USB commands. Perform a full shutdown (not a restart)
The manufacturer behind the VID 14CD is . However, this is not the whole story. The USB ID repository notes that the chip itself likely originates from Moai Electronics Corporation , a Taiwanese semiconductor company. This is a common practice in the consumer electronics industry, where one company manufactures the core chip, and another brands and sells the final product.
Device Details. USB Device. microSD card reader (SY-T18) Device ID 1212. Vendor Details. USB Vendor. DeviceHunt
If this is an old USB 2.0 device, it might not work properly on a USB 3.0 or USB 4.0 port. Use a USB 2.0 port if available.