However, the base IMM version only provides basic management. To unlock full remote control—allowing a technician to see the video output (KVM) and mount ISO images/USB drives over the network (Virtual Media)—an is required.
The key might be installed, but the video redirection engine needs a refresh.
Without the activation key, you can still access the IMM web interface to see temperatures and power status, but you cannot "see" the server or install an OS remotely. ibm imm remote control activation key
: Access your server using its default IP address (192.168.70.125) and your credentials.
Browse your local storage and select the downloaded .key file. Click , then click Upload or Apply . Verify that the key status now shows as Valid or Active . However, the base IMM version only provides basic management
This process is purely mechanical. Power down your server, open the chassis, locate the dedicated slot on the system board labeled for the Virtual Media Key, and insert the physical key. After powering the server back on, the Premium features should be available.
However, the most sought-after feature—full remote control (sometimes referred to as Remote Presence or KVM over IP)—is not available on all IMM-equipped servers by default. This is where the activation key comes into play. Without the activation key, you can still access
If you are a hobbyist or running a home lab and cannot afford the license key, here are ethical workarounds that do not involve cracking the hardware.
Look under the System Configuration or Management section for a link labeled Activation Keys or Features on Demand . Step 3: Upload the Key File Click the Add or Install button. Click Browse and select the .key file you downloaded. Click OK or Upload . Step 4: Verify and Restart IMM
: Click Add... , browse for your downloaded .key file, and click OK to complete the installation.