Excelvan Barcode Scanner User Manual Extra Quality ((link)) Here

+------------------------------------+ | |||| | |||||| || |||| | | |||| | |||||| || |||| | | RESET TO DEFAULT | +------------------------------------+ Use code with caution. Interface Selection

The buzzer volume may be turned off. Scan the High Volume barcode.

Verify the barcode type is enabled in the Symbology Configuration section. Symptom: Missing characters or scrambled data output

If your scanner behaves erratically, transmits corrupted data, or fails to decode specific symbologies, resetting it to factory configurations usually resolves the issue. excelvan barcode scanner user manual extra quality

Most Excelvan scanners (including the popular 2.4GHz wireless and USB wired models) are designed to work right out of the box without requiring specific drivers.

Plug the USB cable into an open port on your computer, POS terminal, or laptop. The scanner will beep once and light up, indicating it has power and is ready.

| Problem | Likely cause | Solution | |---------|--------------|----------| | No beep / no LED | USB power issue | Try another USB port or powered hub | | Scans but types wrong characters | Wrong keyboard layout or interface mode | Scan USB Keyboard (US layout) or set PC keyboard to US | | Adds extra characters (e.g., "A") | Prefix/suffix enabled | Scan Clear prefix + Clear suffix → Exit with Save | | Cannot scan QR code | 2D not enabled or model is 1D only | Check model; enable 2D via configuration | | Scanner beeps 3 times | Unsupported barcode or low contrast | Try better lighting or clean barcode | | Works then stops | Sleep mode (auto power‑save) | Press trigger to wake; disable sleep via config if needed | Verify the barcode type is enabled in the

To configure the scanner, users scan specific programming barcodes found in the Excelvan BP-9502BL Manual or other model-specific guides. Bluetooth Pairing: Turn on the scanner and hold the yellow button for 10 seconds to enter pairing mode.

To get started with an Excelvan scanner, follow these essential steps: User Manual

Try scanning the "Restore Factory Settings" barcode. Plug the USB cable into an open port

Adapt your device to your specific workplace ergonomics by adjusting how it triggers and alerts you. Scanning Modes

Excelvan scanners often hide powerful features that standard users overlook:

Plug the RJ45 end into the scanner and the USB end into your PC. Windows will typically detect the device automatically .