The flash file you need depends on the exact chipset in your phone. Two known working firmware versions are:
, you must first verify your device's hardware before flashing to avoid bricking. Flash File Details
The primarily uses a Spreadtrum (SPD) SC6531EFM chipset, though some variations or clones might feature a MediaTek (MTK) chip such as the MT6260 or MT6261 . To flash this device, you must match the firmware file with the specific CPU inside your handset. Flash File & Tool Requirements For SPD Chipset (Most Common): Flash File: Requires a .pac or .bin format firmware.
Nokia_TA1174_SC9832E_MTK_11.0.0_20220905_PAC.zip
Use Miracle Box , Piranha Tool , or Infinity CM2MTK . nokia ta1174 flash file mtk top
Before you proceed with flashing your Nokia TA-1174, keep the following points in mind:
The Nokia TA1174 is a popular entry-level smartphone known for its durability, stock Android experience, and long battery life. However, like all Android devices, it is prone to software issues—boot loops, IMEI corruption, FRP (Factory Reset Protection) locks, and hard bricks.
Flashing may void your warranty. This guide is for educational purposes. Always own the legal right to use the firmware – typically via official Nokia service documentation or backup of your own device.
This error appears in the flashing log when the tool detects that the phone’s memory is not in a suitable state for writing. The solution is to perform a of the flash memory before attempting the flash again. In Miracle Box or SP Flash Tool, look for an option to format the NOR flash. Some technicians report that this error occurs when the firmware and the phone’s flash chip are not fully compatible, and a full wipe is the only way to proceed. The flash file you need depends on the
Before you begin, ensure you have the correct firmware for the MediaTek (MTK) chipset variant. There are also Spreadtrum (SPD) versions of this model, so verify your CPU type first. MediaTek MT6261DA File Size: Approximately 2.14 MB to 3.00 MB
| Feature | Specification | |---------|----------------| | Model | Nokia TA1174 | | Also Known As | Nokia C01 Plus (in some regions) | | Chipset | Unisoc SC9832E (28nm) – MTK-based | | OS | Android 11 (Go Edition) | | RAM | 1GB / 2GB | | Storage | 16GB / 32GB eMMC | | Flash File Format | PAC (Unisoc), Scatter (MTK), or OFP |
Modern Nokia MTK devices often come with "Secure Boot" enabled. This is a security feature designed to prevent unauthorized code from loading during the boot process. Because of this, standard flashing methods may fail. Technicians often require a "Custom DA" (Download Agent) file or an "Auth" file to bypass this security protocol. The SP Flash Tool must be configured to use these specialized files to successfully authenticate with the Nokia TA1174’s bootloader. Ignoring these requirements often results in errors such as "Download Agent not found" or "Authentication Failed."
the device until the application displays a text notification saying "Flash Success" or "Write Complete" . Step 4: Finalizing Post-Flash Setup Unplug the Micro-USB cable from the phone. To flash this device, you must match the
If your Nokia TA1174 is stuck on a logo, experiencing random reboots, or completely dead (hard brick) after a failed update, you need the to restore the original firmware.
Used only if your device is SPD (not MTK). How to Flash Nokia TA-1174 (MTK Top Procedure) Download and Install the Nokia Miracle Box drivers.
The following method assumes you are using with the MT6261 firmware package. This is the most commonly documented and reliable method for this device.