23km-c051-09v Datasheet Jun 2026

Last updated: October 2024. Specifications subject to change without notice. Always verify with the supplier’s latest revision.

Listed on various industrial supplier sites like Prodemaq .

The motor is equipped with , making it a versatile unipolar or bipolar stepper motor. The 6-wire configuration provides options for how the motor is connected. In unipolar mode, only four of the six leads are used, and a center tap on each winding is left unconnected, which simplifies the driver circuit but typically delivers only about 70% of the motor's holding torque. Conversely, wiring it as a bipolar series motor uses all six wires, or more commonly, the two center taps are cut and isolated, and the four remaining wires are connected to an H-bridge driver. This configuration allows the motor to achieve its full rated torque of 980 mNm but requires a more complex driver. 23km-c051-09v datasheet

The Minebea-Matsushita 23KM-C051-09V Go to product viewer dialog for this item.

The is a NEMA 23 hybrid stepper motor known for its high torque and precision, commonly used in CNC machines and 3D printers. Key Specifications Frame Size : NEMA 23 (57mm x 57mm) Type : Hybrid Stepper Motor Manufacturer : Minebea Motor Manufacturing Corp (NMB) Last updated: October 2024

The NMB Minebea 23KM-C051-09V Go to product viewer dialog for this item.

Digital stepper drivers (e.g., DM542 or TB6600) set to match the 2.0A current rating. Listed on various industrial supplier sites like Prodemaq

The primary electrical and mechanical characteristics for the 23KM-C051-09V are as follows: 1.8° (200 steps per revolution) Rated Current 2.0 A per phase Rated Voltage Resistance 2.0 Ω per phase Inductance Holding Torque 980 mN·m (~9.99 kg·cm / 138 oz·in) Weight ~670g - 675g Shaft Diameter 6.35 mm (1/4") or 6.0 mm with flat 🔌 Wiring & Integration