Try using a different USB port, preferably on the back of the computer (desktop).
The program's primary use is to initialize (reset to 0%) the waste ink counters, which clearing the blinking red light error. Maintenance Features:
If you reset the counter multiple times without addressing the physical ink, the pads will eventually saturate and leak, potentially damaging your desk or the internal electronic circuits of the printer. How to manage the physical ink:
Click the button to check the current counter (it should be at or near 100%). adjustment program epson 1390 resetter fixed
The flashing red lights will disappear, and your printer status will return to "Ready." Troubleshooting Common Resetter Errors
Many antivirus programs flag AdjProg.exe as a false positive. You may need to disable it during the process. 2. Running the Adjustment Program
If your printer was able to complete the reset but is still leaving a mess, I can give you advice on setting up an external waste ink tank. Would that be helpful? Share public link Try using a different USB port, preferably on
Clears the 0 and 80 column counters to 0%, allowing the printer to resume operation. Head ID Setting: Inputting the unique ID for a newly installed print head. Cleaning & Maintenance:
First, it is essential to understand the purpose of the Epson 1390 Adjustment Program. Unlike standard printer drivers, this utility is a service tool designed to reset internal counters, calibrate print head alignment, and—most importantly—reset the waste ink pad counter. The Epson 1390, like many inkjet printers, uses a maintenance tank or absorbent pads to collect excess ink during cleaning cycles. A built-in counter tracks pad usage; when it reaches a factory-set limit, the printer locks down, displaying an error message such as “Service Required” or blinking lights. The adjustment program resets this counter, allowing the printer to function again. The “resetter” refers specifically to the waste ink counter reset function within the program.
This happens when Windows security blocks the execution. Make sure your antivirus is disabled, and ensure you are running the program with full administrator privileges. Setting the compatibility mode of AdjProg.exe to Windows 7 or Windows XP can also resolve stability issues on Windows 10 and 11. If you want to proceed with this fix, let me know: How to manage the physical ink: Click the
A: Yes, using third-party service utilities like the Adjustment Program can void your printer's warranty. It is intended for use by trained technicians. Proceed at your own risk.
The printer stops. Two red lights start flashing. A message pops up on your screen: “Parts inside your printer are at the end of their service life. See your documentation.”
Inside your printer, there is a spongy absorbent pad. Every time you clean the print head (either manually or automatically), a small amount of ink is flushed through the nozzles to unclog them. This waste ink doesn’t evaporate; it drips down into the waste ink pad.
The printer does not have a physical sensor to detect how wet these pads are. Instead, it uses an internal digital counter—the Waste Ink Pad Counter —to estimate ink accumulation based on page count and cleaning cycles.