Automatically stops the wheel at the conclusion of the spin cycle right near the point where the correction weight must be applied.
Apply a clip-on weight to the top-dead-center (12 o’clock) position of the rim lip, or use the gauge arm to precisely stick an adhesive weight on the inside of the barrel, depending on the wheel type. Step 6: Verification Spin
Understanding the Corghi EM 6040 Wheel Balancer: Operation, Features, and Troubleshooting
Once the wheel guard (hood) is lowered, the Corghi EM 6040 automatically initiates the spin cycle.
Fix a precise calibration weight (typically a standard 100-gram or 3.5-ounce weight provided by Corghi) to the outer edge of the rim.
The piezoelectric sensors measure the magnitude and direction of these forces along two different planes (inner and outer lips of the rim).
: The machine includes an automatic wheel clamping feature at the end of the spin cycle for efficiency.
: The machine automatically clamps the wheel at the end of the spin to hold it in position. The technician applies weights to the locations indicated on the display. For alloy wheels, the Alu P programs provide guided placement for adhesive weights. Bangkok Automach Co.,Ltd. Key Technical Features Low Balancing Speed (98 rpm)
: Closing the hood tells the machine to spin the wheel fast.
To keep the EM 6040 performing accurately, regular maintenance and timely troubleshooting are essential.
Select the mounting cone that fits the center bore of the wheel from the back. Slide the wheel onto the shaft, follow with the cone, and tighten the quick-clamp hub nut securely. Step 3: Entering Wheel Dimensions
Traditional weights hammered onto the inner and outer steel rim flanges.
The 100 RPM spin speed means less time waiting. A skilled operator can balance a wheel in under 90 seconds from mount to dismount.
The automatic hood lock prevents accidental contact with the spinning wheel. This is critical for shops training new apprentices.
Automatically stops the wheel at the conclusion of the spin cycle right near the point where the correction weight must be applied.
Apply a clip-on weight to the top-dead-center (12 o’clock) position of the rim lip, or use the gauge arm to precisely stick an adhesive weight on the inside of the barrel, depending on the wheel type. Step 6: Verification Spin
Understanding the Corghi EM 6040 Wheel Balancer: Operation, Features, and Troubleshooting
Once the wheel guard (hood) is lowered, the Corghi EM 6040 automatically initiates the spin cycle. corghi em 6040 wheel balancer work
Fix a precise calibration weight (typically a standard 100-gram or 3.5-ounce weight provided by Corghi) to the outer edge of the rim.
The piezoelectric sensors measure the magnitude and direction of these forces along two different planes (inner and outer lips of the rim).
: The machine includes an automatic wheel clamping feature at the end of the spin cycle for efficiency. Automatically stops the wheel at the conclusion of
: The machine automatically clamps the wheel at the end of the spin to hold it in position. The technician applies weights to the locations indicated on the display. For alloy wheels, the Alu P programs provide guided placement for adhesive weights. Bangkok Automach Co.,Ltd. Key Technical Features Low Balancing Speed (98 rpm)
: Closing the hood tells the machine to spin the wheel fast.
To keep the EM 6040 performing accurately, regular maintenance and timely troubleshooting are essential. Fix a precise calibration weight (typically a standard
Select the mounting cone that fits the center bore of the wheel from the back. Slide the wheel onto the shaft, follow with the cone, and tighten the quick-clamp hub nut securely. Step 3: Entering Wheel Dimensions
Traditional weights hammered onto the inner and outer steel rim flanges.
The 100 RPM spin speed means less time waiting. A skilled operator can balance a wheel in under 90 seconds from mount to dismount.
The automatic hood lock prevents accidental contact with the spinning wheel. This is critical for shops training new apprentices.
