Nalco 8506 Plus Msds - [portable]

: Immediately flush eyes with plenty of water for at least 15 minutes; seek medical attention if irritation persists. Skin Contact : Wash thoroughly with soap and water. Inhalation : Move to fresh air.

Typically includes active neutralizing amines, filming agents, or corrosion inhibitors, depending on the specific application line. Hazard Identification

Harmful if swallowed; causes burns to the mouth, throat, and stomach. First-Aid Measures

I can provide targeted advice based on the . Share public link nalco 8506 plus msds

The MSDS recommends the following minimum PPE:

Summary

: Combustible liquid. Prolonged inhalation of vapor may be harmful. Physical and Chemical Properties : Appearance : Clear, light yellow liquid. pH : Approximately 7.2. Flash Point : > 100°C (> 212°F). Specific Gravity : ~1.0675 at 20°C. Protective Measures : : Immediately flush eyes with plenty of water

Certified under the NSF Nonfood Compounds Registration Program with Category Codes G5 and G7 , rendering it acceptable for treating cooling water, retort systems, boilers, and steam lines in and around food processing areas, provided there is no direct contact with edible products. 2. Chemical Composition and Ingredients

Comprehensive Guide to NALCO 8506 PLUS: MSDS, Safety, and Application

NALCO 8506 PLUS is acceptable for treating cooling systems in food processing areas where neither the treated water nor the steam contacts edible products (Category G7). Share public link The MSDS recommends the following

Not listed as causing cancer or reproductive toxicity.

Small spills should be diluted with water and mopped up, or absorbed using an inert dry material (e.g., sand, earth, vermiculite) and placed in a disposal container. For large spills, dike the area to prevent the chemical from entering waterways, sewers, or basements. Neutralization may be required depending on the localized pH of the product. 5. Handling, Storage, and Engineering Controls