: Restart the computer and repeatedly tap F1 or Fn+F1 when the Lenovo logo appears.
: Go to the Startup tab in the BIOS. Ensure that UEFI/Legacy Boot is configured correctly (modern systems should be set to UEFI only) and check the Boot Priority Order to ensure your primary NVMe SSD is listed at the top of the list.
The ThinkPad P1 Gen 4 supports Supervisor, Power-On, and Hard Disk passwords. If you lose or forget the , it cannot be reset by removing the CMOS battery. For security reasons, the entire motherboard must be replaced. Keep your supervisor passwords safe. 2. Boot Loop or Black Screen After Update lenovo p1 gen 4 bios
This comprehensive guide covers how to access, update, optimize, and troubleshoot the Lenovo ThinkPad P1 Gen 4 BIOS. 1. How to Enter the Lenovo ThinkPad P1 Gen 4 BIOS
: Includes settings for the TPM (Trusted Platform Module), fingerprint reader, and face authentication. 3. Updating the BIOS : Restart the computer and repeatedly tap F1
The Lenovo ThinkPad P1 Gen 4 is a premium, high-performance mobile workstation. To extract every ounce of performance from its Intel Core or Xeon processors and NVIDIA RTX graphics, you must understand its Basic Input/Output System (BIOS). The BIOS controls everything from hardware virtualization to thermal management and security protocols.
Accessing the BIOS on the ThinkPad P1 Gen 4 requires specific timing during the system boot sequence. Because modern NVMe SSDs boot incredibly fast, the window to press the access key is brief. Step-by-Step Access Method Completely shut down your laptop. Press the to turn the system on. The ThinkPad P1 Gen 4 supports Supervisor, Power-On,
If the key press method fails, enter through the operating system:
This guide covers everything you need to know about the , from navigating the interface to updating and configuring optimal settings. 1. How to Enter and Navigate the ThinkPad P1 Gen 4 BIOS
⚡ Use the Lenovo Commercial Vantage app to update your BIOS from Windows—it’s the safest and easiest method for this specific model. [8]
Enter the BIOS (if possible), press F9 to load Setup Defaults, and then press F10 to Save and Exit. Q2: How do I downgrade the BIOS to a previous version?