Felder Ad741 Manual New |best| <2K 2025>

4 mm to 250 mm (0.15 to 9.84 inches)

Essential schemas for identifying precise part numbers when ordering replacements or accessories from Felder.

Always disconnect the main electrical isolator switch before changing knives, cleaning internal gears, or performing mechanical adjustments.

New Felder machines ship with a sticky, protective anti-corrosion grease applied to the cast iron tables. The manual recommends cleaning this off using a mild solvent (like mineral spirits) and a soft cloth. Avoid abrasive pads that could scratch the ground surface. Once clean, apply a dry lubricant like Felder’s Gleit-it to ensure smooth wood feeding without staining the timber. Power Connection

is designed for demanding woodworkers who require high-precision results without sacrificing floor space. Known for its robust construction, this machine combines a 410 mm surfacing planer and a 404 mm thicknesser, making it a powerful "two-in-one" solution. With a new, modernized design, the offers an improved price-performance ratio. Surfacing Width: 410 mm Thicknessing Width: 404 mm Thicknessing Height: 3–230 mm Surfacing Table Length: 2000 mm (prolongable up to 3800 mm) Feed Speed: 6/12 m/min (2 speeds) 2. Unpacking the New AD 741: Key Features When consulting the Felder AD 741 manual felder ad741 manual new

The infeed and outfeed tables must be perfectly parallel to one another. The manual instructs how to use a precise straightedge to check for coplanarity. If adjustment is required, the manual guides you through adjusting the eccentric bearings beneath the cast iron tables. Jointer Fence Alignment

The Felder AD741 is a professional-grade, 16-inch (410 mm) jointer-planer combination machine, renowned in the woodworking community for its robust build quality and precision engineering. It is the entry-level model in Felder's professional 700 series, offering an outstanding price-to-performance ratio for small and mid-sized businesses that demand reliability and exceptional results. Whether you are upgrading from a smaller benchtop model or seeking to centralize your workflow, understanding the nuances of this machine is key to unlocking its full potential and ensuring years of flawless service.

When we talk about a "new manual," it's helpful to understand what that means. The Felder AD741 has been produced for many years, and manuals evolve. A "new manual" typically refers to one of two things:

: This mode uses the long, flat tables to flatten one face of a board and create a straight, square edge. To use the jointer, the spring-assisted planing tables are lifted and locked into the horizontal position. The fence can be tilted from 90 to 45 degrees, allowing you to bevel edges with precision. The depth of cut is set using the front handwheel, which adjusts the infeed table height; its scale is easily readable through an integrated magnifying glass. 4 mm to 250 mm (0

Inspect the guard mechanisms to ensure they slide and spring back smoothly. Weekly Maintenance

Complete Guide to the Felder AD 741 Planer-Thicknesser: Operation, Setup, and Maintenance

The is a professional-grade jointer-planer combination machine from the Felder 700 series . It is designed to save space while providing high-performance 16-inch (410 mm) planing and thicknessing capabilities. Key Features & Capabilities

Position the machine to allow ample clearance for the maximum length of timber you plan to process, both on the infeed and outfeed sides. The manual recommends cleaning this off using a

| Problem | Probable Cause(s) | User-Reported Solution(s) | | :--- | :--- | :--- | | | Worn or flat-spotted yellow tire on drive wheel. | Replace yellow tire or entire wheel assembly. Solution: Always disengage feed when not in use. | | Machine blows fuse on startup | Disintegrated urethane cover on feed rollers causing binding. | Replace the urethane covers on the feed rollers. | | Digital LED display not turning on | Loose connection; Incorrect 24VAC transformer tap configuration for shop voltage. | Check connections in electrical cabinet. Verify 24VAC transformer output matches requirements. | | Machine producing a "spring joint" | Infeed and outfeed tables are not coplanar. | Adjust outfeed table height slightly and re-test with a long straight edge; may require loosening multiple adjustment bolts. | | Loud grinding noise from motor | Loose motor fan. | The fan can fall off the motor shaft. Requires accessing the motor from underneath the machine; a fixable by replacing the fan. | | Thicknesser table adjustment grinding/skipping | Table is out of alignment; mechanical issue in lift mechanism. | Check for debris and re-lubricate. May require professional service to re-align and adjust the thicknesser table mechanism. |

Stand to the side of the infeed table to avoid potential kickback zone.

Outfeed table is set too low; timber is not supported during feed.

The most reliable source is Felder’s official customer portal. You will need your machine’s serial number (found on the motor plate or main casting).

Check the microswitches. The AD 741 features strict safety interlocks. If the planer tables are not fully flipped up or down, or if the dust hood is not locked securely into place, the machine will not power on.