Commax Dp-ra01 Installation Manual ^new^

The DP-RA01 is typically wall-mounted using a provided bracket.

Before mounting or cutting into walls, verify that your site conditions align with the factory requirements of the DP-RA01:

DR-2G, DR-2A2N, DR-2A3N, DR-2AN, DR-201D, DR-2K, DR-20S, DR-201A Durable Plastic

: When a visitor presses the call button at the door station, the handset will ring. commax dp-ra01 installation manual

2-wire system to the door camera/sub-unit (non-polarity).

Once all wiring is complete, plug the power cord into a standard AC outlet. COMMAX DP-2S User Manual | PDF | Electrical Wiring - Scribd

⚠️ If your door camera has 5–6 wires, check the main control box model (e.g., CDV-70A). The DP-RA01 is typically wall-mounted using a provided

Pull the connection wires through the center cavity of the bracket. Step 4: Wire the Handset

Connect of the indoor DP-RA01 to Terminal 2 of the outdoor door unit.

Inspect the wiring connections on Terminals 1 and 2. Look for loose screws or broken wire strands at both the indoor handset and the outdoor unit. Once all wiring is complete, plug the power

: Connect the wires from the door station to the terminal block on the back of the unit.

While holding the handset, press the dedicated key button symbol on the unit. Verify that the connected electric door strike clicks open instantly. 5. Troubleshooting Common Issues

Would you like the or help with a specific error symptom (e.g., “no video but door opens”)?