Do not expose cans to temperatures exceeding 50°C/122°F.
The first section of the ASMACO spray paint SDS provides the product's basic commercial details. It identifies the manufacturer (Anchor Allied Factory Ltd.) and specifies the intended use of the product as an aerosol coating. This section also includes vital emergency contact numbers, which are crucial for first responders during an accidental chemical spill or poisoning event. 2. Hazard Identification
Remove person to fresh air and keep comfortable for breathing. Call a doctor if they feel unwell. asmaco spray paint sds
When he finally suited up—this time with the correct
According to globally harmonized system (GHS) standards, Asmaco aerosol paint carries several critical hazard statements: Do not expose cans to temperatures exceeding 50°C/122°F
Use only in well-ventilated areas to prevent drowsiness or dizziness.
to avoid inhaling microscopic paint particles that can irritate the lungs. 3. The Application Process Asmaco Aerosol Spray Paint Msds - MCHIP This section also includes vital emergency contact numbers,
Strong oxidizing agents, acids, and bases. Hazardous Decomposition Products: Carbon monoxide ( COcap C cap O ) and carbon dioxide ( CO2cap C cap O sub 2 ) are produced during combustion. 11. Toxicological and Ecological Information
| Component | CAS Number | Typical % | Hazard Classification (GHS) | |-----------|------------|-----------|----------------------------| | Acetone | 67-64-1 | 10–30 | Flam. Liq. 2, Eye Irrit. 2, STOT SE 3 | | Toluene | 108-88-3 | 5–15 | Flam. Liq. 2, Repr. 2, STOT RE 2, Asp. Tox. 1 | | Xylenes (mixed) | 1330-20-7 | 5–15 | Flam. Liq. 3, Acute Tox. 4, Skin Irrit. 2 | | Ethylbenzene | 100-41-4 | 1–5 | Flam. Liq. 2, Acute Tox. 4, Carc. 2 (IARC 2B) | | n‑Butyl acetate | 123-86-4 | 10–20 | Flam. Liq. 3, STOT SE 3 | | Propane/Butane (propellant) | 74-98-6 / 106-97-8 | 20–40 | Flam. Gas 1, Press. Gas | | Pigments (e.g., TiO₂, carbon black) | Varies | 1–10 | May include Carc. 2 (TiO₂ via inhalation), Aquatic hazards |
. The product typically contains volatile organic compounds (VOCs), such as acetone and xylene, which act as solvents for the acrylic base. These substances are categorized as "Extremely Flammable Aerosols" (H222) and "Pressurized Containers" (H229), indicating they may burst if exposed to high temperatures. Beyond physical risks, the SDS identifies toxicological hazards, noting that vapors can cause drowsiness, dizziness, and serious eye irritation. RS-online.com Safe Handling and Personal Protection