Store Nalco 77352 in its original, tightly closed container. Keep it in a dry, cool, and well-ventilated space. Protect the product from freezing and extreme heat, as temperature extremes can destabilize the chemical formulation and diminish its efficacy. Follow specific material compatibility guidelines to ensure the storage tank material does not react with the chemical. 8. Exposure Controls and Personal Protection
Used for industrial cooling tower water treatment.
Immediate actionable advice, including instructions to wash hands thoroughly after handling and to avoid releasing the chemical into the environment. 3. Composition and Information on Ingredients nalco 77352 msds
Material Safety Data Sheets (MSDS)—now more commonly referred to as Safety Data Sheets (SDS) under the Globally Harmonized System (GHS)—are regulatory documents that provide comprehensive information about a chemical product. For industrial water treatment facilities and manufacturing plants utilizing , understanding this document is necessary to ensure workplace safety, environmental compliance, and effective chemical management.
: Ensure absorbent materials are readily available. In the event of a spill, avoid breathing vapors or mist and prevent the chemical from entering drains or watercourses. Physical and Chemical Properties : Colorless to yellow : 3.0 – 5.0 Solubility : Complete in water turquoise-az.com Accessing the Full SDS Store Nalco 77352 in its original, tightly closed container
(CAS No. 26172-55-4): 1.0% – 5.0% w/w
. Manufactured by Ecolab / Nalco Water , this industrial additive carries a DANGER signal word due to its acute toxicity, potential to cause permanent tissue damage, and hazardous footprint in aquatic environments. including oxides of carbon
Thermal decomposition can lead to the release of irritating or toxic gases, including oxides of carbon, nitrogen, or sulfur.
: Use with adequate ventilation; an approved respirator is required if significant mists or vapors are generated.
This section confirms the product trade name (), the manufacturer details (Nalco Company/Ecolab), and emergency contact numbers. It provides the unique identifiers needed to verify you have the correct document for the specific batch in your facility. 2. Hazards Identification
| Route of Exposure | Immediate First Aid Action | | :--- | :--- | | | Immediately flush with water for at least 15 minutes while holding eyelids open. Seek immediate medical attention . | | Skin Contact | Immediately flush skin with plenty of water for at least 15 minutes. Wash affected area with soap and water. | | Inhalation | Remove the person to fresh air. If breathing is difficult, administer oxygen. | | Ingestion | Do NOT induce vomiting . Do not give anything to drink. Seek urgent medical attention. |