> Platform Configuration (RBSU) > Storage Options . Ensure the SATA Controller Options is set to HPE Smart Array S100i SR Gen10 SW RAID Go to product viewer dialog for this item. (do not select standard AHCI). Save settings and reboot.
Look for the section labeled "Driver - Storage Controller" or "Driver - Smart Array."
Filter the operating system category by choosing . > Platform Configuration (RBSU) > Storage Options
The HPE Smart Array S100i SR Gen10 software RAID driver for Windows Server 2022 provides a flexible and cost-effective way to configure and manage storage on ProLiant Gen10 servers. With its software-based approach, flexible RAID configurations, and support for multiple disk types, the S100i SR Gen10 is an attractive option for organizations looking to implement RAID on their Windows Server 2022 deployments.
: 6G SATA protocols exclusively; SAS drives are not supported. Maximum Throughput : Up to 14 internal SATA lanes. Save settings and reboot
: If you are installing Windows Server 2022 from scratch, you must manually inject the driver
: Download the .exe driver file. Run it on another PC and select the option to Extract the files to a USB flash drive. Load Driver During Setup : Boot from the Windows Server 2022 media. With its software-based approach
To inject the driver during the initial Windows Setup GUI, you must extract the file contents into a raw format rather than executing the setup file directly.