Proper physical installation is critical to prevent premature wear and ensure the accuracy of the internal pressure sensors.
In international regulatory databases, "FTO" is the applicant code assigned directly to Festo SE & Co. KG .
Products bearing the R-R-FTO-KC-2018 marking generally share standardized industrial architectures. If you are servicing a device with this label, it typically adheres to the following engineering conventions: Electromagnetic Compatibility (EMC) Compliance festo r-r-fto-kc-2018 manual pdf
Find the full technical documentation on the Festo Support Portal .
For technical support or to download the , it is highly recommended to use the official Festo Downloads and Documentation page . : Always fit a dedicated silencer to the
: Always fit a dedicated silencer to the exhaust air port (Port 3), or wire it into a ducted manifold to safely vent downstream pressure. Electrical Wiring and Signal Configurations
Festo proportional regulators and digital sensors are engineered for dynamic closed-loop fluid control. When researching the system manuals, look for these baseline factory specifications: Proportional Regulator (VPPM Series) Digital Pressure Sensor (SPAN Series) 7.0 to 8.0 bar max Variable up to 10 bar Secondary Control Range 0.15 to 6.0 bar (typical) Relays system pressure reading Control Signal Input 0 to 10 V DC or 4 to 20 mA N/A (Output signal only) Media Requirements 40 µm filtered, unlubricated air or inert gases Compressed air / Inert gases Housing Construction Anodized aluminum alloy with Nitrile rubber seals High-grade polymer Certifications RCM, c UL us listed, KCC Certification KCC, CE compliant Pneumatic Installation Protocols c UL us listed
Signifies the Korea Certification mark, confirming compliance with regional EMC directives.
The official technical manual (often titled Technical Data , Mounting Instructions , or Operating Instructions ) is essential for installation and maintenance. The PDF typically contains:
Because KC registration heavily focuses on EMC, these devices require precise installation to prevent radio frequency interference in industrial environments:
: