Link: Firstchip Fc1179 Firmware Link

Never unplug the drive while the firmware update is at 50% or 80%. This will kill the controller.

: This is the primary "Production" tool used for repairing broken firmware, fixing fake capacity, or resetting a "dead" drive. Current Version: V1.0.7.2 (2024-02-21). Alternative Utility ( FC1178/FC1179 MpTools

These tools generally fall into two categories depending on the state of your flash drive's memory: 1. FirstChip FC1179 MpTool (For Normal/Original NAND)

UsbDev FirstChip MPTool Archive – The most complete, regularly updated repository for FirstChip controllers. Look specifically for packages labeled with "FC1179" or "MpTool/ApTool". firstchip fc1179 firmware link

Click (or "Begin"). The process takes 2–10 minutes. Do not disconnect the USB.

Because these drives often use low-quality NAND memory, their firmware becomes corrupted, making the drive unreadable. To fix this, you need the specialized (Mass Production Tool) to flash new firmware onto the controller.

The tool will open. Click the button. Your USB drive should appear in one of the numbered grid boxes. Never unplug the drive while the firmware update

Run the diagnostic tool. It will analyze your device and display its internals.

Before downloading any firmware, confirm that your USB drive truly has an FC1179 controller.

Unplug your USB drive, plug it back in, and Windows should now recognize it as a healthy, brand-new storage device. Troubleshooting Common Flashing Errors Current Version: V1

The FirstChip FC1179 is a popular USB mass storage controller chip manufactured by FirstChip. It is commonly found in generic, bulk, and promotional USB drives.

Open the extracted folder, right-click on FirstChip_MPTool.exe (or FirstChip_APTool.exe ), and select Run as Administrator .

Flashing the firmware via overwrites the controller's code, maps out degraded memory sectors, and restores the drive to factory settings. 🛑 Critical Warning Before You Begin Flashing firmware using an MPTool is a destructive process .

Guide to FirstChip FC1179 Firmware and Repair Tools If you have a USB flash drive that shows "No Media," has the wrong capacity, or is completely unresponsive, it likely uses the FirstChip FC1179

Flashing USB firmware is a delicate process. If you use a tool intended for a different controller, you risk permanently bricking the hardware. Follow this precise workflow to ensure a successful recovery: 1. Verify Your Hardware