Quectel Change Imei Install

The change_imei.xml should contain:

, including the United States and India, as it can be used to bypass blacklists or commit fraud. Quectel officially does not support or recommend user-level IMEI modification. Proceed only if you have a legitimate, legal reason, such as restoring a device's original identity after a repair. Phase 1: Driver and Tool Installation

A PCIe/M.2 to USB adapter or a manufacturer development kit.

in Device Manager (e.g., COM6).

In specialized industrial scenarios, replacing a faulty module and needing the new module to match the old device's network identity (rare). Prerequisites for Quectel IMEI Change

Ensure the host device or baseboard is entirely powered down and disconnected from any power source.

If you need to upgrade or modify your baseband, I can provide steps on how to using Quectel software utilities. quectel change imei install

Before attempting any modification, ensure you have the following: A Terminal Client : Tools like are required to send commands to the modem. USB Drivers

This will yield the same result. Note this number down safely as a baseline. Step 4: Firmware Environment and Configuration Commands

IMEI numbers must be exactly 15 digits. If you enter fewer, the command will fail. The change_imei

Used for debugging and deep NV item manipulation. Quectel USB NMEA Port: Used for GPS/GNSS data streaming. 3. Communicating via AT Commands

: If you get an error, it may be because the modem's interface is "up" and connected to a network. Try disconnecting any WAN or Ethernet connections before running the command. Persistence

Inspect the 15-digit response string. If the installation succeeded, the terminal output will show the new identifier rather than the original factory number. Phase 1: Driver and Tool Installation A PCIe/M

Open a serial terminal program such as PuTTY or Tera Term.